Montrose runway open after repair work from tunnel bore

MONTROSE — Montrose Regional Airport Director Lloyd Arnold reported this week that efforts to stabilize a bulge beneath an airport runway have been completed.

On May 24, a city-hired contractor used a hydrofracturing drilling technique to bore a 1,200-foot tunnel 15 feet under the runway for the installation of a 36-inch-sewer line deemed critical to city growth.

The process created an 8-inch bulge in the middle of an intersection between runway 17-35 and airport taxiway “A.”

According to a Montrose County news release, Hayward Baker Inc., a subcontractor for the city, stabilized the sewer bore by drilling 42 holes into the surface of the runway and taxiway over 343 lineal feet of the bore, and it pumped 60 cubic yards of grout into the bore.

The work was completed during night hours Oct. 17–22. Aircraft used runway 13-31 during the night closures of runway 17-35. Runway 17-35 is now open and operational.

“Safety at the airport is our primary concern. I’d like to thank the city and everyone involved in working together to reach a positive, safe resolution to this unexpected problem,” Arnold said.

Montrose City Manager Bill Bell said Wednesday the city’s cost to repair and stabilize the area was approximately $38,018.


Commenting is not available in this channel entry.

Search More Jobs

734 S. Seventh St.
Grand Junction, CO 81501
970-242-5050; M-F 8:00 - 5:00
Subscribe to print edition
eTear Sheets/ePayments

© 2017 Grand Junction Media, Inc.
By using this site you agree to the Visitor Agreement and the Privacy Policy